Muzzle Brakes by Kahntrol Solutions are 100% MADE IN USA, All materiels, hardware, and processes are certified USA origin. Don’t settle for inexpensive brakes that are made in foreign countries or have questionable origins. If a brake is that inexpensive. What do YOU think was sacrificed? Our Muzzle Brakes keep Americans working!!!
According to our customers, We are ” The most effective muzzle brake available “. We get feedback on a regular basis from folks who have tried most other brands that our brakes are ” The Best Muzzle Brake I’ve ever used “. Whether it be a Remington 700, or Savage Axis, Ruger American, Mossberg ATR, Sako TRG, or AR-10 / AR-15 platform, We’ve got a brake to fit your rifle, and make recoil and muzzle climb a thing of the past.
WE HAVE THREAD-ONS IN STOCK!! Thread-on muzzle brakes in 1/2-28, 9/16-24, 5/8-24, and metric 18x1mm thread patterns!
Muzzle Brakes offer the added benefits of;
-Staying on target so that you can see the bullet impact and place a follow-up if needed.
-Improved accuracy due to less flinching in anticipation of recoil.
-Less noise transmitted downrange while hunting (less chance of spooking on a miss).
-More accurate chronograph readings for handloaders.
Benefits of Clamp-on vs. Threaded: Cost;Though threaded brakes are cheaper, the gunsmithing and refinishing drive the cost higher than clamp-on. No permanent barrel modifications required; Some states DO NOT allow threaded barrels. Removability; If you end up at a range or competition that does not allow muzzle brakes, you can easily remove it with little to no adjustment of zero. Some states prohibit brakes for hunting, so with a clamp on, you can practice, sight-in (in most cases), and then remove before hitting the woods.
Off the shelf models available for most common barrel contours, and for no extra charge(just a little more time), we can custom fit any barrel between .500″ and .925″ muzzle diameter, even odd tapers/contours(custom sizes can take up to 4weeks due to machining lead time and outside processes/anodizing).
Machined from 6061-T6511 aluminum, and MIL-A-8625 Type III hardcoat anodized in Matte Black.
Clamp On Muzzle Brake dimensions are; 3.350″L x 1.625″W x 1.125″H , and weight is 5.1oz.
Threaded Brake dimensions are; 1.125″Hx1.625″Wx2.600″L, and weighs less than 3oz, or about 13grams more than a standard A-2 flashhider.
MADE IN THE U.S.A.
With Muzzle Brakes and recoil reduction, TANSTAAFL, ALWAYS WEAR HEARING PROTECTION!!!
Be sure to check out the knowledge base, for informative posts and recent news and views.