Threaded Muzzle Brakes
We currently offer 3 styles of threaded brakes.
The first is the same as our original Clamp On Muzzle Brakes with threads instead of clamping slots/screws..
The second is our new 3-Gun compliant model. These brakes are made to fit within 3-Gun style competition rules and are designed to be the most effective within those requirements.
NOW AVAILABLE!!! is the HexMod brake that is basically a larger version of the 3-gun and will be Ideal for use on 7mm and larger calibers and is also available (after much demand) in 3/4-24 thread pitch for Bull Barrel installation, as well as AK 14mm-1mm LH thread pitch and all other common, and in the near future, not so common thread pitches. It will also be available in a raw steel state so that the brake can be Custom Installed, contoured, and finished (by your gunsmith) to match your barrel.
Don't let the name fool you, even though these brakes fit within 3-Gun style competition rules where performance is King, they are just as suited on a bolt-guns as they are on a high-speed gas-guns. Made from 4140 steel.
The 3-Gun brake is the most effective brake in its class (1" or smaller) and is extremely effective on bolt guns and precision rifles, like the new Ruger Precision Rifle or RPR. In fact, It is so efficient, that on calibers under .308win there is virtually no performance difference between the 3-Gun and the larger HexMod brake, and even on a 300winmag it will reduce recoil to .243 levels (vs. 223 levels with the HexMod).
Due to the rear diameter of this brake, it looks best on barrels measuring smaller than .830".
1/2-28 accommodates calibers up to .243/6mm (can be reamed out for PCC use, call to order)
9/16-28 accommodates calibers up to .338 (can be reamed out for PCC use, call to order)
5/8-24 accommodates calibers up to .338 (can be reamed out for PCC use, call to order)
15M1 (Sako Rifles) calibers up to .338
Available in Black Oxided 4140
Add crush washer for $2
Back by Popular Demand!!! These brakes are the same as our original clamp-on style brakes but for threaded Barrels. They are EXTREMELY lightweight with unparalleled recoil reduction.
They are Available in 5/8-24 and uses crushwasher, 18-1 metric for Tikka and Sako rifles, as well as The ingenious Crush Washer Elimination System (CWES) for barrels larger than .800" and threaded 5/8-24. These will accommodate calibers "up to 338".
A Larger version of the popular 3-gun brake, but scaled for maximum recoil reduction on larger than .223/5.56 chamberings.
These brakes are available threaded 5/8"-24, and 3/4"-32 .
The 5/8"-24 size will fit ANY rifle threaded 5/8"-24 and has enough shoulder the seat the crushwasher (approx. .675").
The 3/4"-32 size fit some Barrett rifles, Armalite AR-30s, 450bushmasters, 50beowolfs and are well suited for custom install on heavy barrel rifles without having to remove massive amounts of material to thread at 5/8"-24.
Brake shown is installed on a 26" Sendero/Varmint contour Remington 700.
These come in black oxide finish and require crushwasher, shims, peelwasher, or gunsmith fitting to index properly (unless you're real lucky and it indexes as is)
Add crush washer for for additional $2
Introducing the HexMod C.W.E.S. Gen 2
We are proud to announce a new addition to the recently introduced, overwhelmingly Popular, and extremely effective HexMod Brake with the HexMod C.W.E.S. GEN 2(crush washer elimination system).
This version of the HexMod allows a clean looking, secure, and easy to index installation, without having to source crushwashers or clamp your rifle in a vice to torque the washer.
The Gen 2 system uses a bushing with 32pitch OD threads, and 24pitch ID threads that allow you to index the brakes correctly by changing the relative position of threads in relation to the barrel shoulder, in essence, instead of indexing the brake and using a jam-nut, you are indexing the threads to the shoulder and the brake IS the jam-nut. This allows full thread interface, as opposed to a typical jam-nut system that reduces thread interface by up to 50%.
Available in 5/8-24 and requires a minimum barrel diameter of .800"
Available in the following variations:
1/2 inch crush
5/8 inch crush
3/4 inch crush
5/8 inch peel
And yes you read that right, we have 3/4 crush washers made specifically for us to our specs!
Used for indexing threaded brakes.